Properties
- Self-adhesive film especially for inflatable boats made of PVC
- stays in place even when the air is released from the inflatable boat
- also suitable for inflatable boats that sail in salt water
- lettering is provided with a transfer film
- for permanent applications, conditionally removable
*This item is made to customer specifications, therefore there is no right of withdrawal
Recommended tool
You might also like this
Inflatable boat registration number sticker
Are you looking for an Inflatable boat registration number sticker or Boat name inflatable boat sticker? Then you've come to the right place. Our Inflatable boat registration number stickers are plotted from a special film with extreme adhesive strength, which is perfectly suited to the characteristics of an inflatable boat.
Inflatable boat registration number sticker instructions
Attaching the Inflatable boat registration number sticker is child's play thanks to the high quality of the film. The official license plate is successfully attached in just a few simple steps. For the best result, we have created an adhesive guide.
Attention important:
The adhesive reacts with the plasticizers in the PVC. For this reason, the sticker must be heated with a hairdryer after application and the inflatable boat must be inflated for at least 24 hours. After the 24 hours, the inflatable boat can be folded up as usual.
The specified height and width always refer to the total area of the font. Here in the example, "A" is the font height and B is the font width.
For a boat license plate, we recommend a font with digits of the same height.
The inflatable boat must be free of dirt and grease. We recommend isopropanol. After cleaning, it is important that the surface is dry and there are no residues of the cleaner. Now you can start sticking on the Inflatable boat registration number stickers. Measure the lettering straight and fix it with Crepe tape.
Once it is in the right position, fix it in the middle with Crepe tape.
Now cut through the Crepe tape on one side and remove the lettering from the backing paper.
Cut off the backing paper with scissors and fold the lettering back under slight tension.
Then squeegee the letters with even movements and light pressure.
Next, repeat the process for the other side and then press the individual letters down firmly again.
The lettering and the transfer foil must now be heated with a hair dryer. A commercially available hair dryer on a warm setting is sufficient.
During and after blow-drying, the lettering must be pressed firmly into the material with your fingers. There must be no air between the structure of the material and the foil. The heated foil must now rest with the transfer foil for at least 1 hour and tighten.
After the film has rested for at least 1 hour, the transfer film can be carefully removed.
The film must then be reheated with a fon to activate the adhesive.
During and after blow-drying, the sticker must be pressed on firmly with your fingers. The film must be worked into the material. (There must be no air between the film and the material).
The license plate must now be left for 24 hours. The adhesive needs 24 hours to develop its full strength. The inflatable boat must remain fully inflated.
Inflatable boat labeling
Inflatable boat owners are familiar with the problem of how to get the registration number sticker or Boat name inflatable boat onto their boat. The most common method is to paint on the number using a stencil and paint. However, the disadvantage here is the relatively large amount of work involved and it cannot be removed again. A real problem if you want to sell it again or if the number changes. Self-adhesive registration numbers made from normal foil only last for a short time, if at all, and come off as soon as the air is let out of the inflatable boat.
Our special film for Inflatable boat registration number stickers has a particularly strong adhesive and is elastic. These properties ensure permanent adhesion even after repeated mounting and dismounting.
Inflatable boat registration number sticker production
We provide each boat license plate for inflatable boats with a transfer film. This makes attaching the lettering child's play.
Once we have received your order, we will start producing your inflatable boat number. The individual letters are cut out of the special self-adhesive film by a plotter. So that you don't have to stick the letters on individually, the lettering is provided with a transfer foil. It holds all the individual letters together and is simply removed again after application. What remains is the plotted license plate. The film is weatherproof, UV-resistant and also suitable for driving in salt water.
Order boat license plates for inflatable boats online
At STINGWRAP, you can order your inflatable boat number directly online. Thanks to our lettering configurator, you can design the right Inflatable boat labeling yourself from different fonts and colors. Select the desired font height of the lettering and the length will be displayed automatically. The price of the Inflatable boat registration number sticker depends on the size and quantity of the lettering and is also calculated automatically.
Inflatable boat labeling from STINGWRAP
We have been the experts in the field of Inflatable boat labeling and stickers for many years. We supply Inflatable boat labeling to private and commercial customers on a daily basis.
We know exactly what is important for an Inflatable boat registration number sticker or a Boat name inflatable boat. You can order your Inflatable boat registration number sticker from us conveniently online and we will produce it for you in the highest quality.
FAQ
The surface to be covered must be free of dust, dirt and grease. We recommend isopropanol for cleaning.
As we have a special film for use on inflatable boats, sticking it on is very easy. Simply use a squeegee or sponge to press the sticker onto the PVC material. Use a sponge to work the film into the unevenness of the inflatable boat material.
current customer reviews
Ulrich Ruby
Problem
I had a problem which was solved very quickly, very friendly and competently. Thank you for that
Hans-Jörg
Foil labeling
Simply great! Choose on the web side - many different fonts and all pay directly according to the standard, wait a short time, stick it on and you're done!
Herbert knabb
Boat numbers
Delivery was very fast !!! The boat numbers stick quite well on the dinghy !!! So far everything is fine!
Dirk
Also ideally suited for hybrid kayaks
I ordered the name lettering as inflatable boat stickers for my Scubi 1XL hybrid kayak, as the material structure and type are comparable. The stickers were delivered quickly and were easy to apply using the instructions. The stickers survived the christening ;-) and the first few trips without any problems.
Klaus G
Perfect
Exactly what I wanted.
Heiko Wojach
Boat license plate
Super foil fast delivery everything top