Properties
- Self-adhesive 3D letters
- Surface with wood coating
- Material: PMMA colored through (acrylic glass)
- Material thickness: 4.7 mm (incl. adhesive)
- Seawater resistant
*This item is made to customer specification, therefore there is no right of withdrawal.
Scope of delivery
- Self-adhesive lettering - in individual letters depending on the font
- Mounting template
- Special cleaner for pre-treatment
- Cleaning cloth
- Adhesive tape for fixing the template
- Measuring tape
- Installation instructions
You might also like this
3D lettering wood
Our 3D lettering wood is made from black cast acrylic glass. The surface is finished with a wood look coating of your choice. This makes 3D wood lettering in mahogany, maple and much more possible. The 3D wood lettering surface is even available with a grain. The 3D wood lettering is self-adhesive thanks to the high-performance adhesive already applied. This simplifies installation so much that it can be carried out without specialist knowledge. You don't need any additional accessories, as everything you need for installation is included in the scope of delivery.
Choose the right wood decor for your boat now
Here you will find a detailed overview of all wood decors. The wood finish can be compared in the configurator using the number displayed after the name.
Choose your type of wood
Canadian maple (FW-1138)
Oak (FW-1129)
Beech (FW-327)
Cherry (FW-888)
Walnut (FW-886)
Nut (FW-609H)
Smoked larch (FW-338)
Bog oak (FW-324)
Douglas fir smoked (FW-521)
Gluing instructions
The specified height and width always refer to the total area of the font. Here in the example, "A" is the font height and B is the font width.
A mounting set is included with every 3D Boat lettering. It contains all the accessories you need for installation.
The first step is to clean the substrate. You can use the supplied cleaner for this. Stronger cleaners may need to be used for heavier soiling.
Now that the surface is free of dust and grease, place the supplied stencil in the desired position using the Crepe tape. If the stencil is too high or wide, these areas can be cut to size with sturdy scissors.
As not all fonts can be aligned using the letters, there are engraved guide lines in the template. These guide lines can be used to align the lettering with millimetre precision.
The template must be aligned to the exact same auxiliary line on the left and right. This can be seen in the example on the 30 cm line.
Once the template has been successfully aligned, we recommend fixing it in place with additional Crepe tape so that it can no longer slip.
The high-performance adhesive on the back of the 3D letters is covered with protective paper. This protective paper must now be carefully removed. Take care not to damage the foam of the adhesive.
The template is 1 mm larger all round than the letters so that the letters can be inserted without any problems. The letters must be placed in the center of the recess. Then press the entire letter firmly into place.
Connected letters can be lightly pressed on one side while holding the other end in the air. This allows the lettering to be rotated and positioned correctly in the template.
Place all the letters and fonts completely in the template and press everything down firmly again. The stencil can then be removed.
Some lettering has a protective film. Once this protective film has been removed, the installation is complete. We wish you lots of fun and success with your 3D Boat lettering!
Gallery 3D wood
current customer reviews
Sophie Blondy
Excellent order - highly recommended
I ordered the letters and logo that I had specially designed for the boat from this website. The exchange to confirm the dimensions was very quick and efficient. The package was sent directly to the shipyard in France at my request. Upon opening the package: a "wow" effect! Beautifully executed. The letters and logo in 3D are of very good quality. They were very well protected and safely stowed away in the packaging. There is also a transparent template to position all the elements correctly. I can highly recommend this company who really delivered on my request and exceeded my expectations. Thank you very much.
Dieter
Really to recommend
From ordering to production and shipping, everything went great. High quality - really recommendable. Many thanks and best regards.