Adhesive instructions for Boat design stickers
In this guide, you will learn how to apply Boat design stickers to your boat step by step - cleanly and permanently. This will give your boat the perfect look in no time at all.
Fix Boat stickers with masking tape and measure straight.
Fix Boat stickers with masking tape and measure straight.
Also attach an adhesive strip in the middle.
Also attach an adhesive strip in the middle.
Cut the masking tape on the side and remove the motif from the backing paper.
Cut the masking tape on the side and remove the motif from the backing paper.
Cut through the backing paper with scissors and fold back the tribal with the backing paper.
Cut through the backing paper with scissors and fold back the tribal with the backing paper.
Squeegee the tribal with even pressure.
Squeegee the tribal with even pressure.
Repeat the process for the other side and press the entire sticker down firmly again.
Repeat the process for the other side and press the entire sticker down firmly again.
Finally, carefully remove the transfer foil.
Finally, carefully remove the transfer foil.
What remains is your tribal sticker.
What remains is your tribal sticker.