Adhesive instructions for Boat stickers (dry)
These instructions will guide you step by step through the dry application process. It is particularly suitable for smaller motifs such as lettering or logos. As there is no water involved, you can apply the stickers directly - quickly, easily and, with a little practice, with absolute precision.
Remove foil
First remove the excess film around the motif.
Measure stickers
Fix the sticker on both sides with Crepe tape and measure it in at the desired position.
Fixing stickers
Now stick a strip of Crepe tape over the center of the sticker.
Remove the first side of the sticker.
Now cut through the Crepe tape on one side.
Remove sticker
Peel the sticker off the paper up to the fixation in the middle.
Cut off the backing paper
Then cut the paper near the center fixation.
glue on first half
Now fold the sticker back over...
glue on first half
of the cut marking.
Press on sticker
Now you can press the sticker on with even up and down movements using the felt squeegee.
release second page
Repeat the process on the other side of the sticker.
Press on the second side of the sticker
Now press on the sticker with the felt squeegee.
Final result of the sticker
This ensures that the sticker is applied bubble-free.